In order to perform a diagnosis we will demand the ADS interface for connecting INPA cablevision + INPA software. (BMW INPA Ediabas freedown and installtion)

The interface, which I accept here: http://world wide web.uobdii.com/wholesale/bmw-inpa-ediabas-obd-ads-interface.html

I presume from taking off in a situation when fully operate INPA software or detects the bombardment (battery) and ignition.  After a successfully loaded INPA information technology is time for you want to change and will be here for the needed tool, which is called the NCS Practiced and is located in the Get-go Menu in the aforementioned folder in which the INPA. Thus, they works.

BMW INPA / Ediabas OBD & ADS Interface

NCS-expert-on-INPA-ADS-interface

Disclaimer:

The text was translated class a Polish BMW forum, and you are on your own chance.

  1. Launch the NCS Adept (we assume that INPA package we have installed in the linguistic communication is not German).
  1. Choose File -> Load Contour
  2. Choose window profiles, select Adept Mode and click OK.
  3.  Select File -> Edit Contour
  4. In the window Password Entry give the password to profile: repxet and click OK.
  5. In the Profile Editor window, click the button Individualisierung (bottom left)
  6. In Memory Machine window select the option Individualisierung aktiv in the Motorcar / Central Memory, and click OK
  7.  Click the Profile push button info (bottom right) in the window editor Profile
  8. In the info window profiles in the Profile Proper noun field with individualisation we add to our profile name sounded Expert Fashion with individualisation (this way we volition exist able to easily distinguish information technology for the future of the original contour Expert Mode) and click OK
  9. In the Profiles window, click consistence Editor cheque – should announced Info window that says consistence bank check OK
  10.  In the Profile Editor window, click OK
  11. Choose File -> Save Contour As and File Name box, change the contour number to another or FZG3.PFL and click OK
  12. Choose File -> Load Profile Choose and window profiles accept now Expert Mode profile with individualisation who select and click ok
  13. Connect the ADS interface with the laptop. Strapped cables, we put our key into the ignition and turn on the ignition (non fire up the engine)
  14. Cull the VIN / ZCS / FA (F1)
  15. Select ZCS / FA f. ECU (read data ZCS / FA ECU our car)
  16.  Choose CHASIS window select E39 (in my case).
  17.  Choose the ECU box, select EWS and click ok … after a while, filling up the fields FG GM SA and VN
  18. Select the options Back F6
  19. Select Car Memory (F5)
  20. We volition become the following message:
  21. In this window way of operation determines whether the programmed key or car (Car Memory / Key Retentiveness 1-4). My Bmka no key programming so I didn't use of this, and therefore that portion Skip to something non mix. For me it was but Motorcar Retentivity. In that location is a list of functions which nosotros can reprogram. These functions are displayed in German.

In the parameter we have state of the parameter, the aktiv and their aktiv. Literka South is a serial setting us literka and private settings.

23. Earlier we can modify the settings should exist wybraz Read or F1. August dimming buttons on the dozen / tens of seconds until the car will be read out of our current settings. When black buttons again will nosotros begin to dig. And then we choose functions in the center pane then select the desired options in the right pane and printing the F2 have over. Name of the part to be programmed with porzadanym country appears in the pane on the bottom. If you lot desire to remove functions (not to alter its condition) invades the bottom of the window and click the Delete F3. When we change what we already striking F4 Circulate and later a while we will come across a window confirming the setting parameters. Voila!  Disconnect INPA OBD & ADS cable and examination whether it is as we wanted.

PS. If y'all modify the settings of lights then when programming (optional circulate) start to blink u.s.a. light and backlight buttons in the middle. With me so it was. Programming did so without panic.

  • BMW INPA
  • BMW INPA / Ediabas OBD & ADS Interface
  • BMW INPA software
  • BMW INPA/Ediabas
  • INPA software
  • NCS skilful coding
  • NCS-Expert